Topline PS is produced by saw blades that are arranged at specific intervals to
create the linear face. Round perforations specially arranged on identical
spacing are used to bore into the back side of the panel until
the cutting head causes a perforation in the bottom of the
face groove. A variety of groove width and spacing arrangements allow
for a wide range of acoustical performance tailored to any need.
Acoustical Testing has been performed on all
configurations of Topline in conjunction with a number of
absorptive backing materials. This means that third octave band
data is available for all of the Topline products. Whether the
emphasis is on maximum broad band absorption values , tuned
absorption for high performance at specific frequencies, or
simply a beautiful finish with the benefit of good acoustical
performance, Topline will be the solution.
Installation of the Topline PS panels is
varied. Topline PS can
can be produced with our Elite, Select, Standard Reveal,
Standard Flush or Basic edge details. Panel sizes vary according
to the edge detail chosen. Contact us for details.
Woodtrends panel systems show
off the veneers natural beauty
by applying two coats of clear UV cured poly-acrylate lacquer
with a satin sheen.