Sound Seal
wood walls and wood ceilings


Woodtrends Standard Linear Planks for Ceilings

This system consists of genuine wood veneered to a MDF or chipboard core. The edges of the planks have grooves running the length and width in which the installation clips and and alignment/cover, if needed, are installed. The planks are finished with 2 coats of a UV cured polyacrylate lacquer. This system is installed by the attachment of pivot clips onto a typical 15/16" grid. The 9.4" and 11.4" wide planks are available with round or elongated perforations and can achieve NRC values as high as 0.90.Woodtrends Standard for Ceilings is offered in two edge details; reveal edge and flush edge.
The Reveal Edge detail leaves a 5mm, 10mm or 20mm groove between planks. Decorative spacer strips, veneered or black MDF, or acoustically transparent spacer strips are available to conceal the mechanicals in the plenum or any insulation used for sound absorption from below if neccessary.

The Flush Edge detail features edges that butt together. A 2mm bevel, showing a v groove, defines the seam between the planks. A concealed strip is used along the panels length to facilitate easy panel alignment.

Class A Fire Rated Composite Available
NRC Values as High as .90
MDF, Chipboard or Plywood Substrates
Flush or reveal Edge Available
Standard Plank Sizes: 4.5", 7.5", 9.4", 11.4" widths and 8', 9' & 10' Lengths. Also available as a panel system - 2 x 2 & 2 x 4

finish finish        


  Home | Contact | Basic Wood Ceilings | Elite Wood Ceilings | Select Wood Ceilings | Topline Panel Systems | Topline | Timbre | Custom | Standard Reveal Edge | Standard Flush Edge | Veneer Options | Perforation Options | Specifications | Arcat Specifications | Custom Staining | Acoustics 101 | Leed | Gallery |